Recycling

Aluminum can be reused for the same purpose over and over again. Unlike many other materials, aluminum does not lose its unique properties. Moreover, recycling requires only 5% of the original energy input.

Profiles for “Green” design

The extrusion technique has few limitations. You can incorporate a number of functions into the section, to make the extrusion easier for the machine and simplier to install. You can save metal by placing most of it where it is needed most and consequently reducing the weight of the structure.

Alupco for “Green” cooperation

Cooperation with Alupco offers major oppurtunities to reduce the impact on our environment. This is achieved due to the properties of aluminum, the opportunities and efforts offered by Alupco. Around 20% of Alupco’s total production is based on recycled aluminum billets being produced at Alupco’s facilities.

In addition, Alupco can assume responsibility for all further processing. This offers substantial logistics advantages and reduced environmental impact. Equipments and processes are enhanced continually to meet the environmental requirements set by others or that we establish internally.

Alupco is implementing environmental and quality systems.Internationally recognized quality awards such as Qualicoat and Qualanod. Alupco has obtained the certification of environmetal compliance issued by the President of Meteorology &Environment of the Kingdom of Saudi Arabia. In 1995, Alupco qualified for ISO 9001 certification, and was the first ever Aluminum extrusion company in the Middle East that was approved of such a distinction. At present, Alupco holds Quality Management ISO 9001: 2000 certification.

Alupco’s facilities at Dammam and Jeddah industrial cities have

     • 9 Extrusion presses with a total annual extrusion capacity exceeding 85,000 Metric Tons.

     • Plans for expansions with new presses to reach 100,000 Metric Tons.

     • 5 Powder coating lines with a total capacity exceeding 65,000 Metric Tons.

     • Plans for expansions include a new additional anodizing line.

     • 2 Anodizing lines with a total capacity exceeding 12,000 Metric Tons.

     • 2 Polishing lines with a total capacity exceeding 1,000 Metric Tons.

     • 2 Wood finish (powder to powder) production line

     • Plans for a new Film Wood Finish line

     • 1 Thermal Break Crimping production line with plans to increase to 2

     • 2 Protection Taping line

     • New Aluminum Composite Panel Plant expected for commercial start up soon.

In its 135,000 square meters facilities operating over 800 experienced personnel with different nationalities.

Dammam Plant

     - Press 1: 1650 MT / 7”

     - Press 2: 2500 MT / 8.5”

     - Press 3: 3500 MT / 10”

     - Press 4: 2500 MT / 8.5”

     - Soft and Hard Alloy Maximum Circumfrance Size 10”

Jeddah Plant

     - Press 1: 2100 MT / 8”

     - Press 2: 2500 MT / 8.5”

     - Press 3: 2500 MT / 8.5”

     - Press 4: 2500 MT / 8.5”

     - Press 5: 2500 MT / 8.5”

     - Soft and Hard Alloy Maximum Circumfrance Size 8.5”

Alupco is committed to continueto produce the highest quality profiles in different dimensions, and alloys to meet the market needs.

     - Wide range of Aluminum Alloys and Tempers.

     - Porthole Pipe Profiles up to 220 mm Diameter

     - Solid Rectangular & Channel profiles up to 160x320 mm dimension.

     - Maximum Profile Lengths up to 20 meters.

Select a gallery folder to see its images

  • 1
  • 10
  • 11
  • 12
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

Latest News
  • ALUPCO has built its reputation from simple extrusions to customer tailored demands. Today ALUPCO...      
  • ALUPCO has built its reputation from simple extrusions to customer tailored demands. Today ALUPCO...